The Mortgage Stress Test: How Your Qualifying Rate Works
If you borrow from a bank or another federally regulated lender, or put less than 20% down, you have to show you could keep up your payments at a higher rate than the one in your contract. That is the mortgage stress test. Here is how the qualifying rate is set, how it feeds the debt ratios lenders use, where the test applies and where it may not, and what you can do if it limits your budget.
The short version
The stress test doesn't change your payment. It changes the payment a lender uses to decide how much you can borrow. For insured and uninsured mortgages alike, the qualifying rate is your contract rate plus 2% or 5.25%, whichever is higher. The federal banking regulator, OSFI, sets the rule for uninsured mortgages and reviews it at least once a year; the federal government applies the same rule to insured mortgages at any lender. The payment at that rate goes into your GDS and TDS debt ratios. You face the test when you buy, refinance or add a home equity line of credit, but not when you renew with your lender or make a straight switch at renewal. For uninsured mortgages, provincial credit unions and private lenders set their own rules. Lower debts or a bigger down payment can help.
What the stress test checks
Your contract rate is the interest rate in your mortgage agreement, the rate your payments are based on. The qualifying rate is a higher rate the lender uses only to test your application. FCAC, the Financial Consumer Agency of Canada, says federally regulated lenders such as banks require you to pass this test, at a rate typically higher than the one in your contract.
The idea is to leave room for change. OSFI, the federal regulator of banks and other federally regulated lenders, says the buffer shows that borrowers can absorb some negative impacts to their finances, and the floor accounts for risks from changes in the broader economy. In practice, you qualify for less than you would at your contract rate, and you still pay at your contract rate.
How the qualifying rate is set
The rule is the same for insured and uninsured mortgages: the greater of your contract rate plus 2% or 5.25%.
- Uninsured mortgages. With 20% or more down, OSFI's Guideline B-20 sets the rule for banks and other federally regulated lenders. OSFI calls it the minimum qualifying rate and reviews both the 2% buffer and the 5.25% floor at least once a year.
- Insured mortgages. With less than 20% down, you need mortgage default insurance, and the federal government sets the qualifying rate as part of the insurance rules. CMHC tests the loans it insures at this rate, with the premium included in the loan amount. I explain the insurance in Mortgage Default Insurance.
- Fixed or variable. CMHC applies the same rule to fixed, adjustable and variable rates.
Two examples, with rates for illustration only: at a 4.5% contract rate, you qualify at 6.5%. At 3.0%, the contract rate plus 2% would be 5.0%, so the 5.25% floor applies instead.
How it feeds your debt ratios
Lenders use two ratios, which I explain step by step in How Much House Can You Afford?
- Gross debt service (GDS). Your housing costs as a share of gross income: the mortgage payment, property taxes, heating and half of any strata fees.
- Total debt service (TDS). Your housing costs plus other debt payments, such as car loans, student loans, support payments, credit cards and lines of credit.
The stress test works through the mortgage payment: in both ratios, it is calculated at the qualifying rate, not your contract rate. CMHC caps the mortgages it insures at 39% GDS and 44% TDS, and counts at least 3% of any credit card or unsecured line of credit balance as a monthly payment. For uninsured mortgages, OSFI expects each lender to set its own limits, and FCAC uses 39% and 44% as a general guide.
A worked example
Here is an example with illustrative numbers: a $560,000 mortgage over 25 years at an example contract rate of 4.5%, with property taxes of $250 a month, heating of $100 a month and strata fees of $400 a month, counted at half ($200).
- Payment at the 4.5% contract rate: about $3,099 a month. This is what you would pay.
- Payment at the 6.5% qualifying rate: about $3,751 a month. This is what the lender tests.
- Housing costs for GDS: about $4,301 a month at the qualifying rate, against about $3,649 at the contract rate.
- Income needed at 39% GDS: about $132,300 a year, compared with about $112,300 if the lender used the contract rate.
- With a $700 car payment: TDS becomes the limit, and the income needed at 44% rises to about $136,400.
In this example, the stress test adds about $20,000 to the household income needed for the same mortgage, or about $17,800 with the car payment. Your lender's own figures for heating and other costs may differ.
Where the test applies
- A new mortgage at a federally regulated lender. OSFI expects banks and other federally regulated lenders to apply the qualifying rate to most newly underwritten uninsured mortgages.
- Any insured mortgage. With less than 20% down, the federal insurance rules apply the test whoever your lender is.
- Refinancing or a home equity line of credit (HELOC). FCAC says that if you already have a mortgage, you need to pass the test to refinance your home or to take out a HELOC.
Where it may not apply
- Renewing with your current lender. OSFI has said lenders aren't expected to re-apply the qualifying rate to existing borrowers who are renewing. Your lender may still have its own renewal checks.
- A straight switch at renewal. OSFI doesn't expect lenders to apply the qualifying rate when you move an uninsured mortgage from one federally regulated lender to another at renewal, as long as the loan amount and amortization don't increase. The federal government also lets insured mortgage holders switch lenders at renewal without another stress test. FCAC notes a new lender may still use different criteria; I cover switching in Renewing Your Mortgage.
- Provincially regulated credit unions. Most BC credit unions are regulated by the BC Financial Services Authority (BCFSA), and OSFI's guideline applies only to federally regulated lenders, which include federal credit unions. FCAC notes that lenders that aren't federally regulated may also ask you to pass a stress test, so ask a credit union whether it is provincially or federally regulated and which rate it uses.
- Private lenders. Mortgage investment corporations and individual lenders aren't regulated by OSFI and set their own tests. Read B Lenders and Private Mortgages before you go that route.
If the stress test limits your budget
- Get pre-approved first. A lender works out the maximum at the qualifying rate before you shop; see Why Mortgage Pre-Approval Matters.
- Pay down other debts. When TDS is your limit, each $100 a month of other payments cuts the mortgage you qualify for by about $14,900 at a 6.5% qualifying rate over 25 years. Clearing a $10,000 credit card balance frees at least $300 a month under CMHC's 3% rule.
- Put more down. A smaller loan means a smaller qualifying payment, and with 20% or more down you don't need default insurance, so no premium is added to the loan.
- Add a co-borrower or guarantor. The lender looks at their income and their debts too; see Co-Signing a Mortgage.
- Choose a longer amortization, if you're eligible. Spreading the loan over 30 years lowers the qualifying payment but adds interest; see Mortgage Amortization.
Passing the test doesn't make a payment comfortable, so set your own monthly limit too.
Questions buyers often ask me
Does the stress test change my mortgage payment?
No. You pay at your contract rate. The qualifying rate is only used to check that you could still manage if rates rose or your finances changed, and that check sets how much you can borrow.
If my lender offers me 4%, what rate do I qualify at?
At a 4% contract rate, you qualify at 6%, because 4% plus 2% is higher than the 5.25% floor. The floor only comes into play when the contract rate is below 3.25%.
Do I have to pass the stress test again when I renew?
Not if you renew with your current lender, and generally not for a straight switch to another lender at renewal without borrowing more or extending your amortization, though a new lender can still apply its own criteria. Refinancing or adding a home equity line of credit brings the test back.
Can a bigger down payment get me out of the stress test?
No. With 20% or more down your mortgage is uninsured, and banks and other federally regulated lenders still apply the qualifying rate under OSFI's guideline. A bigger down payment does shrink the loan, so the payment being tested is smaller.
Do BC credit unions use the stress test?
For insured mortgages, yes: the federal insurance rules apply at any lender. For uninsured mortgages, a federal credit union follows OSFI's rule. A provincially regulated one isn't bound by it but may still test you, so ask each one what rate it uses.
Ready to work out your numbers? Compare fixed and variable rates, read about choosing a mortgage broker or a bank, or try my mortgage calculator.
Wondering what you'll qualify for?
I can help you plan your budget and connect you with mortgage professionals who can tell you what you qualify for before you start looking. Call or text 778-834-1706, email silvana@silvanaazurdia.ca or send me a message. Happy to help in English or Spanish.
This article is general information, not financial advice. The details come from OSFI, FCAC, CMHC, the federal Department of Finance and BCFSA, and were current at the time of writing; OSFI reviews the qualifying rate at least once a year, and your lender's own rules may be stricter. For FCAC's guide, see preparing to get a mortgage.
Recent Posts











