Wood-Burning Fireplaces and Stoves in Metro Vancouver: Rules, Inspections and Insurance
If your home has a wood-burning fireplace, insert or stove, or the home you want to buy does, Metro Vancouver's bylaw decides whether and when you can use it. Here is how registration, the summer ban and the firewood rules work, what certified means, when a WETT inspection comes up, what your insurer needs to know and what to ask before you buy.
The short version
Inside Metro Vancouver's Urban Containment Boundary, a wood-burning fireplace, insert or stove must be registered before use, and since September 15, 2025, unregistered ones can't be used, with narrow exceptions. Certified stoves and inserts, appliances that are a home's only heat, and fireplaces used only with manufactured firelogs can be registered. From May 15 to September 15, burning is banned unless wood is your only heat or there's an emergency, such as a power outage of more than three hours. Burn only clean, dry wood. In Abbotsford, Chilliwack and Mission, the rules differ. Have the chimney inspected every year, tell your insurer, and ask for a recent WETT inspection before you buy.
Where Metro Vancouver's bylaw applies
Metro Vancouver's Residential Indoor Wood Burning Emission Regulation Bylaw No. 1303 covers fireplaces, inserts, wood stoves, pellet stoves, masonry heaters and wood-burning furnaces in homes across the region, from Vancouver to the Langleys and Maple Ridge. It is strictest inside the Urban Containment Boundary, Metro Vancouver's regionally defined area for urban development. Outside the boundary, you don't register, but you still declare that you follow best burning practices. In Lions Bay, the ban on using unregistered appliances starts September 15, 2032.
Abbotsford, Chilliwack and Mission are in the Fraser Valley Regional District, where Bylaw 1303 doesn't apply and rules differ by city. Abbotsford's Fire Service Bylaw, for example, rules out painted, treated or adhesive material as fuel. Province-wide, BC's Solid Fuel Burning Domestic Appliance Regulation allows only untreated, seasoned wood, manufactured firelogs, pellets and a few other solid fuels, with paper or cardboard only to start a fire.
Registration and the 2025 rule
Inside the boundary, you must register an eligible appliance before you use it. Registration is free, online or on paper, and asks for the owner's and operator's names, the address, the model and proof that the appliance qualifies. Three kinds of appliance are eligible:
- Certified appliances. Ones that meet the emission standards in the bylaw's Schedule A.
- Sole source of heat. An appliance that is the only heating in the home.
- Firelogs only. An appliance, including an uncertified fireplace, used exclusively with manufactured firelogs.
Since September 15, 2025, an unregistered appliance can't be used inside the boundary, except in an emergency or, for an appliance that isn't eligible, in a qualifying low-income household. You renew the best burning practices declaration at least every three years, and when you replace the appliance.
The summer ban, smoke and what you can burn
- May 15 to September 15. No burning, unless the appliance is the home's sole source of heat or the home is off-grid outside the boundary. Burning is allowed in an emergency, such as an outage of heating energy lasting more than three hours.
- Fuel. Only clean, seasoned wood, wood pellets or manufactured firelogs, with non-glossy, uncoated paper to start the fire. Seasoned means 20% moisture or less by weight. Never burn garbage, plastics, rubber, or treated or painted wood.
- Smoke. No visible smoke except for up to 20 minutes in any four hours while starting a fire.
- Air quality warnings. The bylaw has no separate rule for them. Metro Vancouver issues warnings in this region; elsewhere in BC, the province's fine particulate warnings ask people to avoid wood stoves and fireplaces unless wood is their only heat.
- Enforcement. Metro Vancouver starts with education and warnings, and can move to tickets of $100 to $500.
Metro Vancouver suggests seasoning wood for at least six months, splitting it 7.5 to 15 cm across, stacking and covering it, and checking it with a moisture meter. Smoke means the fire needs more air or drier wood.
Certified stoves and inserts, and open fireplaces
A certified appliance has been tested by an accredited organization to an emission standard, Canada's CSA B415.1 or the US Environmental Protection Agency's, and labelled to match. Metro Vancouver says the mark may be on the back of a freestanding stove or behind the faceplate of an insert, and the manual or a retailer can confirm it. In BC, new appliances sold by vendors must be certified to the Canadian or US standard.
An open fireplace without a certification mark can be registered inside the boundary only to burn manufactured firelogs, unless it is the home's sole source of heat or another exemption applies.
WETT inspections, sweeping and permits
WETT, short for Wood Energy Technology Transfer, is a non-profit training association that certifies people, not appliances, and isn't a regulator. Its inspections come in three levels:
- Level 1, visual. Visible parts, clearances, doors and dampers, and the chimney from the ground. WETT says this is enough for most insurance and real estate inspections.
- Level 2, technical. A hands-on review, when an insurer or the local authority asks for one or a visual inspection finds concerns.
- Level 3, invasive. For concealed parts a technical inspection flags, or after a chimney fire.
WETT's website lists certified inspectors, sweeps and technicians. The province recommends having heating systems, vents, chimneys and flues inspected every year by a licensed contractor. Smouldering fires build up creosote, a combustible deposit, in the chimney, Metro Vancouver notes. Cities such as Coquitlam and Chilliwack require a building permit to install a wood-burning appliance; see hiring a contractor in BC.
Telling your insurer
BC's Insurance Act makes it a condition of your home insurance that you promptly tell your insurer, in writing, about a change that is material to the risk and within your control. If you don't, the policy can be void for the part affected; if you do, the insurer may ask for more premium or end the policy. So talk to your insurer or broker before you install a wood-burning appliance or buy a home with one, and expect that it may ask for a WETT inspection. I explain how policies work in home insurance for houses in BC.
Safety at home
- Smoke alarms. BC's Fire Code requires them in every home. The province advises one inside every bedroom, outside each sleeping area and on every level, tested monthly and replaced at 10 years.
- Carbon monoxide alarms. The province says every home with a fuel-burning appliance, attached garage or fireplace should have one, ideally on every level and outside each sleeping area, at least 15 feet (about 4.6 metres) from fuel-burning appliances.
- Ashes. Dispose of them in a metal container, as Victoria's fire department advises, and keep it outside, away from the house.
- Screens and spacing. Use a screen in front of an open fireplace, keep the damper open until the ashes are cool, and keep anything that can burn at least a metre from heating appliances.
- Chimney top. Keep the cap and spark arrestor in good repair; Victoria's fire department recommends a spark arrestor on the cap.
Buying a home with a fireplace or stove
- What is it? An open fireplace, an insert or a freestanding stove, and how old is it?
- Is it certified and registered? Look for the certification mark and ask when the declaration is due. Registration lists the owner and operator, so check with Metro Vancouver about updating it after you move in.
- When was it last inspected and swept? Ask for a recent WETT report, the sweep's invoice and whether a permit covered the installation.
- What will insurance cost? Get a quote with the appliance included before your subjects come off.
- What do the strata bylaws say? Bylaws can govern how strata lots and common property are used, and under the Standard Bylaws the strata maintains chimneys attached to the building exterior. See what strata bylaws can say.
Thinking of converting? A gas fireplace needs a gas permit from Technical Safety BC or your municipality, and strata owners can't take out a homeowner permit, so they must hire a licensed contractor. For electric heat, see heat pumps in BC.
Questions homeowners often ask me
Can I still burn wood in my open fireplace?
Inside the Urban Containment Boundary, generally not, unless the fireplace is certified or is your home's only heat. An uncertified fireplace can be registered to burn manufactured firelogs only. Outside the boundary, and outside Metro Vancouver, different rules apply.
Does registering cost anything?
No, Metro Vancouver doesn't charge a fee. Inside the boundary, you renew the best burning practices declaration at least every three years, and again whenever you replace the appliance.
Can I use my wood stove during a summer power outage?
Yes, if it's an emergency under the bylaw, such as an outage of heating energy lasting more than three hours. Otherwise, from May 15 to September 15, you can generally burn only if wood is your home's sole source of heat.
Do I need a WETT inspection to buy a home with a wood stove?
Your insurer may ask for one, and it shows the system's condition before you commit. WETT says a visual, Level 1 inspection is usually enough for insurance and real estate purposes, with a Level 2 if it turns up concerns.
Does Metro Vancouver's bylaw apply in Abbotsford or Chilliwack?
No. Abbotsford, Chilliwack and Mission are in the Fraser Valley Regional District. Provincial rules on fuel and on selling certified appliances still apply there, and each city has its own bylaws, so check with yours before you install or buy.
Getting ready for winter? See my fall and winter home maintenance checklist, read what home inspectors check, or see what to look for when buying an older home.
Looking at a home with a fireplace?
I would be glad to help you weigh a home with a wood-burning fireplace or stove and plan the questions and inspections before you buy. Call or text 778-834-1706, email silvana@silvanaazurdia.ca or send me a message. Happy to help in English or Spanish.
This article is general information, not legal or insurance advice. The details come from Metro Vancouver and its Bylaw No. 1303, the Province of BC, WETT Inc., Technical Safety BC, BC's Insurance Act and the cities of Abbotsford, Chilliwack, Coquitlam, North Vancouver and Victoria, and were current at the time of writing; Metro Vancouver says its bylaw governs if a summary differs. For registration and the full rules, see Metro Vancouver's residential indoor wood burning page.
Recent Posts










